The SAVARD: Half-Bridged Monoblock Power Amplifier - SAV4000.1
Step Into Big-Boy Power and Unmatched Sub-Bass Punch
Welcome to the big leagues. Designed specifically for bass enthusiasts who demand devastating power output, this heavy-hitting half-bridged monoblock amplifier delivers relentless low-end punch, incredible efficiency, and raw energy to push high-power subwoofer setups to their absolute limit.
CRITICAL ELECTRICAL SYSTEM WARNING: This amplifier is built for serious power demands. Before installation, ensure your vehicle's electrical system is fully upgraded to support this monster. A high-output alternator, heavy-duty big-3 wiring upgrade, and dedicated auxiliary batteries/capacitors are strongly recommended to prevent severe voltage drops and protect your equipment.
Core Performance Specs
Feature | Specification |
|---|---|
Output Power (@ 1 Ohms) | 4000W x 1 CH |
Output Power (@ 2 Ohms) | 2500W x 1 CH |
Output Power (@ 4 Ohms) | 1350W x 1 CH |
Total Harmonic Distortion | < 0.01% (T.H.D+N) |
Signal-to-Noise Ratio | > 95 dB |
Frequency Response | 20Hz – 250 Hz |
Note: This amplifier is 1-Ohm stable reactively (meaning after dynamic impedance/inductance rise, etc.). Please consult with a SAVARD Tech if additional system support or setup guidance is needed.
Precision Bass Tuning & Monoblock Control
The SAVARD Monoblock gives you total control over your sub-bass stage with comprehensive low-frequency signal shaping.
Variable Low-Pass Filter (LPF): Precision frequency adjustment lets you dial in the exact low-pass cutoff to match your subwoofer enclosure.
Subsonic Filter & Bass Boost: Protect your woofers from ultra-low, destructive frequencies while boosting punch where it matters most.
Master / Slave Linkable Capability: Need double the punishment? Strap two units together in a master/slave configuration for extreme competition-grade setups.
Advanced Safety & Build
We’ve engineered this amplifier to perform under pressure without breaking a sweat.
Intelligent Monitoring: Features dedicated OK (Power) and Fault (PRT) LED indicators for real-time status updates.
Thermal Protection: Built-in overheat protection triggers at 85°C 185°F to safeguard your electronics.
Compact Footprint: High power doesn't have to mean high bulk. The sleek 20.625 x 10 x 2.5 inch chassis fits easily under seats or in tight trunk spaces.
Subwoofer Wiring Options
Engineered for low-impedance subwoofer configurations to extract maximum power output:
Reactive Impedance Stability: This amplifier is 1-ohm stable reactively, meaning it remains stable at a 1-ohm nominal load after accounting for voice coil inductance rise and other dynamic reactive factors during operation. Consult with a SAVARD Tech if support is needed.
Single Woofer Load: Run a dual 2-Ohm subwoofer wired in parallel down to 1 Ohm for maximum power draw.
Multi-Sub Array: Parallel-wire multiple woofers into the heavy-duty block terminals for massive surface area sound pressure.
Strapped Pair Mode: Link two identical monoblocks to deliver combined force into a high-power subwoofer array.
Pro Tip: Monitor your resting voltage closely during operation. To unleash true big-boy bass safely, ensure your electrical voltage stays strictly above 12.8V under heavy output loads.
Step up your sound stage. Experience true monoblock power with SAVARD.
